| Manufacturer | Numax |
| Model | 3 in 1 Flooring Nailer |
Numax 3 in 1 flooring nailer for staples, T and L cleats
The 3-in-1 Flooring Nailer and Stapler from NuMax is great for the professional and homeowner alike. This nailer is easy to operate and conveniently shoots all three types of flooring fasteners; 15-1/2-gauge flooring staples, 16-gauge T-Cleats, and 16-gauge L-Cleats ranging in size from 1-1/2 to 2 Inches long. The NuMax nailer has a long handle that provides a more comfortable use and the 2 interchangeable base plates allow you to install 1/2 Inch, 15/32 Inch, 5/8 Inch, 19/32 Inch, 3/4 Inch and 25/32 Inch tongue and groove wood flooring. The NuMax flooring nailer also comes with a non-marring white rubber mallet.
Some tips for beginners from a Home Depot reviewer:
1) Take a scrap piece of hardwood and find a place on your subflooring to try out this unit. This will get you comfortable with using the nailer, and also help you to determine the right pressure setting for your compressor. Too little pressure, the nail won't drive through, too much, and you can split the tongue of the wood piece.
(2) This nailer won't help with the perimeter of the room if the nailer butts up against a wall. You should have a brad nail-gun to go directly through the finished wood surface, then use wood filler to cover the nail head. Do practice nailing with this gun also; you may find you need more or less pressure from the compressor
The Southeast Seattle Tool Library
http://setools.org/
4425 MLK Jr. Way S #100http://setools.org/
In a garage behind the building at the SW corner of MLK and Genesee
Seattle, WA, 98108
USA
202 780 7296