Angle Grinder - NOT for Flat Cutting Discs In Stock Now

4 1/2" Angle Grinder for grinding and sanding only. DO NOT use Cutting Discs (e.g., thin flat discs for cutting metal or masonry) with this tool.

Can only be used with:

• Grinding discs with a depressed center, type 27
• Grinding discs with an integrated hub (raised center ring), type 27
• Sanding flap discs with an integrated hub (raised center ring)
• Sanding flap discs with a separate unthreaded backing flange
• Flat sanding discs with a rubber backing pad
• 3 inch wire cup brushes
• 4 inch wire wheels

CANNOT be used with 

• Cutoff discs - flat black discs for cutting metal or masonry. NO!!
• Flat segmented diamond cutting discs. NO!!

See pages 6-8 of this manual:

https://www.toolservicenet.com/i/DEWALT/GLOBALBOM/QU/DW400/2/Instruction_Manual/EN/624539-00_DW400.pdf