| Manufacturer | DeWalt |
| Model | DW2535 |
Countersink set for #6, #8, and #10 screws with replaceable drill bits. In plastic ziploc bag with instructions on original yellow card from package. This set works with all 3/8 and 1/2 in. drills and drill/drivers.
- 1/4 in. shank that requires a minimum 1/4 in. chuck
- 1-step drilling, countersinking and counter boring in fine wood
- High-speed steel construction
- 4-cutter countersink and tapered drill bit design for reliable speed and a clean finish
The Southeast Seattle Tool Library
http://setools.org/
4425 MLK Jr. Way S #100http://setools.org/
In a garage behind the building at the SW corner of MLK and Genesee
Seattle, WA, 98108
USA
202 780 7296