Siding Nailer Due 5/8/2024

Pneumatic siding nailer.

• SIDING NAILER: Accepts 16 degree wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15 degree plastic collated coil siding nails from 1-1/2" - 2-1/4" 
• SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch 
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads 
• FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility 
• NO MAR NOSE CAP: Protects material from accidental marks 
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications 

Some tips from a tool library user:

• the nail heads should be at the top of the chamber, and there is an adjustable table under the coil that should be adjusted upwards when using shorter nails. 
  
• Put about 10-15 drops of hydraulic tool oil in the hose connector of the nail gun once a day before you use it.